JB/T 10793.1-2007 高精度加工中心 第1部分：卧式机床 精度检验
作者:标准资料网 时间:2024-05-16 11:12:00 浏览:9225
来源:标准资料网
基本信息
| 标准名称： | 高精度加工中心 第1部分：卧式机床 精度检验 |
| 英文名称： | High precision machining centres-Part 1: Accuracy tests for machines with horizontal spindle |
| 中标分类： |
机械 >>
金属切削机床 >>
钻、镗、铣床 |
| ICS分类： |
机械制造 >>
工业自动化系统 >>
机械加工中心
|
| 发布部门： | 中华人民共和国国家发展和改革委员会 |
| 发布日期： | 2007-10-08 |
| 实施日期： | 2008-03-01 |
| 首发日期： | |
| 作废日期： | |
| 提出单位： | 中国机械工业联合会 |
| 归口单位： | 全国金属切削机床标准化技术委员会 |
| 起草单位： | 北京机床所;交大昆机科技股份有限公司;北京铣床研究所等 |
| 起草人： | 张维、唐其寿、胡瑞琳、许立亭、钱文明、周斌成 |
| 出版社： | 中国机械工业出版社 |
| 出版日期： | 2008-03-01 |
| 页数： | 46页 |
适用范围
JB/T10793的本部分规定了高精度卧式加工中心的几何精度、定位精度和重复定位精度（包括工件夹持托板、）工作精度的要求及方法。
本部分适用于基本上具有四个数控轴线，其中三个线性轴线（X、Y、Z）行程至2000MM和一个回转轴线（B）的高精度卧式加工中心。
线性轴线行程大于2000MM的高精度卧式加工中心也可参照使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 金属切削机床 钻 镗 铣床 机械制造 工业自动化系统 机械加工中心
基本信息
| 标准名称： | 工业有机废气催化净化装置认定技术条件 |
| 英文名称： | Catalytic gas cleaner for industrial organic emission |
| 中标分类： |
机械 >>
通用机械与设备 >>
环境保护设备 |
| 替代情况： | 被HJ/T 389-2007代替 |
| 发布日期： | 1998-05-27 |
| 实施日期： | 1998-05-27 |
| 首发日期： | |
| 作废日期： | 2008-03-01 |
| 出版日期： | |
| 页数： | 8页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 通用机械与设备 环境保护设备
Product Code:SAE J2014
Title:Pneumatic Tires for Military Tactical Wheeled Vehicles
Issuing Committee:Truck And Bus Tire Committee
Scope: This SAE Recommended Practice applies to all combinations of pneumatic tires for military tactical wheeled vehicles only as defined in SAE J2013. This applies to original equipment and new replacement tires and the retreading of these tires.This document describes tests and test methodology, which will be used to evaluate and measure tire and tire/vehicle related performance. The mission profile of the vehicle determines which of these tests are required and should be selected. Therefore, all of the tests included in this document are not required for each tire.The tire technical activity for the vehicle system has the responsibility for the selection of a specific test(s) to be used. The selected test(s) should be limited to that required to evaluate the tire or tire-vehicle characteristic which is related to the desired vehicle performance.Selected requirements of this specification shall be used as the basis for procurement of a tire for military tactical wheeled vehicles.
Rationale: This SAE Recommended Practice applies to all combinations of pneumatic tires for military tactical wheeled vehicles only as defined in SAE J2013. This applies to original equipment and new replacement tires and the retreading of these tires.This document describes tests and test methodology, which will be used to evaluate and measure tire and tire/vehicle related performance. The mission profile of the vehicle determines which of these tests are required and should be selected. Therefore, all of the tests included in this document are not required for each tire.The tire technical activity for the vehicle system has the responsibility for the selection of a specific test(s) to be used. The selected test(s) should be limited to that required to evaluate the tire or tire-vehicle characteristic which is related to the desired vehicle performance.Selected requirements of this specification shall be used as the basis for procurement of a tire for military tactical wheeled vehicles.
